The PanGu Board and MPU are equipped with rich interface resources such as DDR3L memory, eMMC Flash, Gigabit Ethernet, HDMI, Audio, USB, LCD, etc., and the extra GPIO is led out through the board-to-board connector, which is convenient for users to expand. Rich peripherals.

The PanGu Board system structure is as follows:

With the PanGu board, i2SOM provides user manuals, PDF schematics, mechanical structure drawings and other related information.

Provide developers with a stable design reference and a complete software development environment, which can help developers improve development efficiency, shorten development cycle, optimize design quality, and accelerate product development and time to market.

Features

• MPU- Dual Cortex-A7, max frequency 650MHz

  • Cortex-M4，max frequency 209Mhz

  • OpenGL ES 2.0

• Flash

  • 16bit DDR3L RAM

  • 8bit eMMC Flash

  • Quad-SPI NOR Flash

  • Support Micro SD card

• Audio

  • 3.5mm stereo headphone jack

  • Support microphone input

• Display

  • Parallel RGB LCD display interface, the max resolution up to WXGA (1366x768)

  • MIPI DSI interface

  • Support for resistive and capacitive touch screens

  • HDMI interface, support audio output

• USB- 1x Highspeed USB 2.0 OTG, support device or host switch, use Micro Type-AB connecor

  • 2x Highspeed USB Host, use Type-A connector

• Camera

  • 8bit parallel camera interface

• LEDs

  • 1x red LED, stand for system power status

  • 2x blue LEDs, user programmable

• KEYs

  • 1x system reset key

  • 1x user programmable key

• Debug

  • Support JTAG/SWD debug signal

  • Serial debug port, use TTL level

• Power- 1x 3.81mm DC jack, support 5V/2A power adapter, also support use micro USB interface as power input.

  • Support CR1225 backup battery holder

• PCB Size (W x L )- 105.5mm x 70mm

• Working temperature

  • 0-70°C

• Extension interface- 80pin B2B connector

  • 30pin 2.0mm header

  • Support GPIO/I2C/SPI/CAN/TIM/UART/SDIO/ADC/USB/FMC