Do not electrically plug or unplug the interface or disassemble the gateway.
The GW102 gateway has a mains power input range of DC 9 to 24V and a built-in anti-reverse connection circuit. The external connector is a 2Pin terminal block with locking 3.81mm pitch. It is recommended to use 12V/2A DC power supply to power the gateway.
The following is a physical drawing of the power terminals:
The terminal pins are defined as follows:
Wiring Instructions
| Wire Index | Function | Description |
|---|---|---|
| 1 | V+ | DC power input |
| 2 | V- | DC Power Ground |